This Universal Airsoft Smart Charger works with both NiCad and MiMH batteries. There is a selector switch allowing you to charge with either 1.0A or 2.0A output. It can also charge a range of batteries from 6 to 12 volts. The battery charger comes with both large and small Tamiya adapters. This Smart Charger will look out for your battery for you!
Features
- It is a multi-current Universal Fast and Smart Charger for any NiMH / NiCd Battery packs from 6V-12V (5-10 cell pack)
- 100-240V AC input for worldwide use.
- Automatically detects battery pack's voltage as well as being able to tell if the battery voltage is low or if the battery is damaged.
- Automatic cut-off by negative delta V when detecting battery temperature is over 60 degrees celsius.
- 4 hour safety timer, charger will stop charging after it operates for 4 hours.
- Two current levels: e.g. 1.0A and 2.0A are selectable by a switch.
- Fast charging time is approximately 70 minutes to 210 minutes depending on the capacity of the battery.
- A standard Tamiya male connector is installed with the charger. Ideal for charging all 6V to 12V airsoft gun battery packs.
- One set of Clip adapters with female Tamiya connectors included for charging any type of battery packs.
- One connector adapter from standard male Tamiya to mini female Tamiya for charging airsoft gun battery packs.
- Dimensions: 1.5"H x 2.36"W x 4.67"L
- Weight: 0.6lb
- Input Value: AC100V-240V 50/60Hz 0.6A Max.
- Output Value: DC 16V 1.0/2.0A
- Also includes booklet of instructions, safety tips and features.
Not for use on battery packs under 6V or over 12V or with a capacity of 1000mAh or 5000mAh